+- Maniaradio Forums (https://www.maniaradio.it/forum)
+-- Forum: BktTimeSync (https://www.maniaradio.it/forum/forumdisplay.php?fid=28)
+--- Forum: BktTimeSync (https://www.maniaradio.it/forum/forumdisplay.php?fid=22)
+--- Thread: BktTimeSync uses 1 logical processor on i7 CPU (/showthread.php?tid=491)
BktTimeSync uses 1 logical processor on i7 CPU - Randmental - 12-01-2020
I have Bktimesync running on an i7 - 6700K processor with (4 cores 8 logical processors)
The application works great receiving the NEMA GPS information from a BG7TBL 10MHz GPSDSO, or I can use a UBlox M7 receiver, both go directly onto the Main board COM1 serial port.
The concern I have is that the application always consumes a full logical processor of the i7, which seems to indicate it is not thread based / aware. With a 9600bps incoming NEMA data rate, it should not consume a full processor.
Is there perhaps a setting I can use so it don't continuously use 1/8th of the PC's capacity?
RE: BktTimeSync uses 1 logical processor on i7 CPU - iz2bkt - 12-02-2020
Hi,
try to change "Always connected to GPS" and set "Max Error" to 1 second or more and "Sync every" to 60 minutes or more.
You can also try to play with serial port parameters.